Installation guide for

Evolve Body Dryer

Medium
1 hour

Installation and Use Methods

1

Installation Method

Fix the two metal backs provided in the accessory package on the wall as shown, then buckle the dryer into the metal backs.

2

Start the Device

Plug in the power; the LCD screen will light up.

3

How to Use

  • LCD Touch Panel: The panel displays all operating information.
  • On/Off Switch: Tap to start the machine; tap again to turn it off. When turned off, the negative ion indicator stops flashing (note that the fan may continue for a few seconds to cool the heating element).
  • Negative Ion Indicator: Flashes while the machine is active and stops when off.
  • Temperature Display: The left side shows the output air temperature.
  • Wind Speed Adjustment: Press the corresponding buttons to increase or decrease wind speed.
  • Temperature Adjustment: Use the up/down buttons to adjust the temperature.
  • Special Function Mode: At startup, the dryer works at the highest temperature and lowest wind speed for 50 seconds, then automatically advances through the gears (2nd for 40s, 3rd for 40s) until it stabilises. The maximum continuous running time is 10 minutes. If the user adjusts the settings, the special mode exits.

Need Additional Help?

Our support team is here to help if you encounter any issues during installation.

Secure

© 2025 Supertune Ltd T/A iDry. All rights reserved.

Powered byRODA Technology Ltd